Used BIESSE Rover 30 CNC POINT TO POINT, New in 2001!
480v; 3ph; 60hz.
Working cap.: X-Axis = 174.75" (4,438 mm), Y-axis = 49.2" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65.4" (1,600 mm) for boring & 61.8" (1,570 mm) for routing, Z-axis = 10.8" (275 mm); max. workpiece height: 6.7" (170 mm) max. programmable speed: X- and Y-axis - 230 FPM (70 MPM)and Z-axis - 98 FPM (30 MPM).
Equipped with: (20) Independent vertical boring spindles forming a L-configuration with (10) spindles on the Y-axis and (10) spindles on the X-axis; inverter controlled variable spindle speed up to 4,000 RPM.
A total of (8) horizontal spindles provide horizontal boring capabilities on all four edges of the panel, (6) on the X-axis (3 in ea. direction), (2) in the Y-axis (1 in ea. direction); head is arranged to accommodate (2) operating units.
Options included: (1) 10.5 HP vertically mounted HSD LH/RH router, inverter driven 1,000 - 20,000 RPM with max. torque from 12,000 to 24,000 RPM, equipped with ISO 30 adapters.
8-position "Ride Along" Automatic tool changer for "on the fly" tool changes.
Work area with: (8) Adjustable panel supports and lifting bars ea. with: (3) Vacuum cups per support; each support with metric LCD display for quick positioning of vacuum cups & support rails and with value input from controller according to part size and machining required; setup for (2) independent working areas with double boring stop unit equipped with: (8) pneumatic frontstops, (4) pneumatic side stops and (4) add. central stops; front row & central stops with "quick fit" mushroom clamps for clamping of small or awkward shaped parts; each work zone with: (1) Quick Connect vacuum outlet for custom vacuum fixtures.
Separate control console with: "XNC" Controller, 32-bit 486DXE-100 MHz processor, 540 MB hard drive, 14" color monitor, international keyboard, soft touch keypad & industrial mouse, RS-232 serial port and (1) 1.44 MB floppy disk drive; PC operating system for Windows operating system 95, 98 and NT; programs can be transferred via diskette or downloading by wire is possible; built-in 1,500 W air conditioner for constant temperature & dust free environment.
Includes: 11 KVA Stabilized Auto-Transformer for voltages between 220 - 600 volt, 100 cbm/Hr BECKER vacuum pump and automatic "forced" lubrication system for guides & ball screw; emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with debris curtain around bottom edge.
Replacement cost: $155,000.00(approx.).
Specifications are approximate and to the best of our knowledge. Verification is available upon request.